[ad_1]
Before smartphones like Apple’s iPhone became water-repellent, many of us relied on a reliable rice bag as a way to remove moisture and restore damaged phones to working order.
It was like putting a wet iPhone in a Ziploc bag of rice and hoping for the best. However, Apple is now telling customers that this miracle cure is nothing more than an old wives’ tale. Apple says in a new support document that placing a wet iPhone in a basmati bag may actually make things worse.

iPhone 14 is currently just £539 on Amazon
Save £159 and get the iPhone 14 for just £539 on Amazon today.
- Amazon
- It was 699 pounds
- Currently £539.10
view deals
“Don’t put your iPhone inside a rice bag. Doing so, small grains of rice can damage your iPhone,” Apple says in a support document advising customers what to do if their iPhone or accessories get wet. It is stated in.
Speaker holes and charging ports can always get blocked by things like rice grains, so it’s no wonder Apple is advising people not to do that now that phones are water-repellent.
The company also says you shouldn’t try to dry your phone using an external heat source (I once melted an Apple iBook keyboard with a hair dryer) or compressed air. It also says that you should not use cotton swabs or paper towels inside the charging connector to absorb moisture.
Modern iPhones are IP68 water and dust resistant, so these home remedies are rarely necessary. For example, the latest iPhones should be able to withstand depths of up to 4 meters for 30 minutes.
Often, when an iPhone encounters water, Apple will notify users when they try to charge the phone and advise them to wait until the phone is completely dry. It is still possible to charge the battery wirelessly during this period.
Here’s the full advice from Apple’s new support document:
Let your iPhone dry.
- With the connector facing down, tap your iPhone in your hand to remove any excess liquid. Place your iPhone in a dry area with airflow.
- After at least 30 minutes, try charging with a Lightning or USB-C cable or connecting an accessory.
- If the alert appears again, there is still liquid in the connector or under the cable pins. Leave your iPhone in a dry, well-ventilated area for up to 1 day. During this period, you can retry charging or connecting the accessory. It may take up to 24 hours to completely dry.
- If your phone is dry but still won’t charge, unplug the cable from the adapter, disconnect the adapter from the wall (if possible), and plug it back in.
[ad_2]
Source link